英国PPM迷你无线室内空气质量监测仪Mini IAQ Profile

产品介绍

产品名称：迷你无线室内空气质量监测仪

品牌：PPM

产地：英国

型号：Mini IAQ Profile

 

迷你无线室内空气质量监测仪Mini IAQ Profile介绍：

 

Mini IAQ Profile 系统旨在提供建筑物室内空气质量的可视化表示，作为与病态建筑综合症等条件相关的建筑物管理标准的一部分. 由于大量单元可以联网，系统可以显示不同位置选定的 IAQ 参数浓度随时间的精确变化。Mini IAQ Profile Monitor 系统使用户能够控制和运行多个不同的无线 IAQ 采样单元——所有这些单元都通过复杂可靠的 ZigBee 无线网状系统进行通信。网状网络系统具有成本效益、易于安装和使用简单：组成网状网络的节点自动配置**信号路径。无线网状系统的其他优点是它是自我修复的，这意味着即使节点发生故障或连接变坏，网络仍然可以运行。结果，形成了一个非常可靠的网络。

 

Mini IAQ Profile Monitor 结合了多种先进的气体传感器技术来监测目标气体，包括 NDIR、PID 和电化学，并提供四种主要配置，所有这些配置都可以联网在一起。

 

 

配置1：

迷你无线电视

—种无线htv解决方案，可用于监测建筑物中空气中的甲醛含量。

还提供对该区域内的温度和湿度水平的监测。

额外的继电器选项允许控制警报和空调系统。

 

 

配置2：

迷你无线传感器

内置温度和湿度模块，可配备多达3个IAQ参数传感器。这些包括但不限于:

二氧化氮(NO2)

—氧化碳(CO)

二氧化碳(CO2)

二氧化硫(SO2)

总挥发性有机化合物(TVoc)

臭氧(O3)

氨(NH3)

甲烷(CH4)

烟

运动传感器

 

 

配置3：

迷你温度和湿度

允许监澳建到丛Bio湿度水平。

可以与Zigbee 网状网络上的其他迷你无线单元和IAQ监视器联网。

 

 

配置4：

迷你报警系统

带有3个内置继电器的专用无线系统，用于控制各种输出，例如声音/视觉警报系统和其他第三方系统。

还提供对该区域内的温度和湿度水平的监测。

可以与Zigbee 网状网络上的其他迷你无线单元和IAQ监视器联网

 

 

迷你无线室内空气质量监测仪Mini IAQ Profile参数：

 

电源供电：12v DC 通过带有 2.5mm 直径插头的外部 DC 适配器

工作范围：0-30oC, 15-90%RH

尺寸：145mm x 145mm x 55mm（容纳3个室内空气质量参数传感器以及温度和湿度）

易于安装：只需将随附的 USB 模块插入 PC，然后将电源连接到墙上的 IAQ 监视器。IAQ 监测装置可通过 VESA 标准支架轻松安装在墙上

软件：内置 PPMonitor Wireless 专用管理软件，用于管理 PC

          需要 Windows XP 专业版或 Windows 7 专业版

采样率：每分钟多 3 个参数数据值

低电量：2.4GHz ISM 频段接收器

不同的天线选项：针对所需的不同网络覆盖

数据速率：250kbit/s 空中数据速率

频道：16 个通道（802.15.4 通道 11 至 26）

力量：+3dBm 输出功率（+5dB 升压模式）

灵敏度：-98dBm 的高灵敏度（典型值为 1% 数据包错误率）

记忆：128k 闪存，5kbytes SRAM

 

PPMonitor 软件

 

 

 

中文内容来自机器翻译，内容仅供参考，实际内容可参考原厂介绍或以合同为准。

英文原文：

 

The Mini IAQ Profile system has been designed to give a visual representation of indoor air quality in buildings, as part of the buildings management standards in relation to conditions such as Sick Building Syndrome. Since a great number of units can be networked, the system can show prescise changes in concentration of selected IAQ parameters in various locations over time. The Mini IAQ Profile Monitor system enables the user to control and run several different wireless IAQ sampling units — all communicating together via the sophisticated and reliable ZigBee wireless mesh system. The mesh network system is costeffective, easy to install and simple to use: the nodes which make up the mesh automatically configure the optimal signal route. Other advantages of a wireless mesh system is that it is self healing meaning that the network can still operate even when a node breaks down or a connection goes bad. As a results, a very reliable network is formed. The size of the wireless mesh can be easily extended by simply adding new Mini IAQ Monitor units or even the larger IAQ monitor units, as each one is also a router for it's neighbours.

 

 

The Mini IAQ Profile Monitor incorporates a variety of advanced gas sensor technologies to monitor the target gases including NDIR, PID and Electrochemical and is available in four main configurations, all of which can be networked together.

 

 

Configuration 1：

Mini Wireless htv

A wireless htv solution, which can be used to monitor airborne formaldehyde levels in a building.

Also provides monitoring of temperature and humidity levels within the area.

Additional relay option to allow control of alarm and air-conditioning systems.

 

 

Configuration 2：

Mini Wireless Sensor

 

Built in temperature and humidity module, and available with up to 3 IAQ parameter sensors. These include but are not limited to:

Nitrogen Dioxide (NO2)

Carbon Monoxide (CO)

Carbon Dioxide (CO2)

Sulphur Dioxide (SO2)

Total Volatile Organic Compounds (TVOC's)

Ozone (O3)

Ammonia (NH3)

Methane (CH4)

Smoke

Motion Sensor

 

 

Configuration 3：

Mini Temp & Humidity

Allows for monitoring of temperature and humidity levels within a building.

Can be networked with other mini wireless units and IAQ monitors on the Zigbee mesh network.

 

 

Configuration 4：

Mini Alarm system

A dedicated wireless system with 3 inbuilt relays to control various outputs such as audible/ visual alarm systems and other third party systems.

Also provides monitoring of temperature and humidity levels within the area.

Can be networked with other mini wireless units and IAQ monitors on the Zigbee mesh network

 

 

Instrument Specifications：

Mains Powered：12v DC via external DC adaptor with 2.5mm diameter jack plug

Operating Range：0-30oC, 15-90%RH

Dimensions：145mm x 145mm x 55mm (Houses 3 IAQ parameter sensors as well as temperature and humidity)

Easy to Install：Simply plug the included USB module into the PC and connect up the power to the IAQ monitor on the wall. The IAQ Monitor Units are easily wall mounted via VESA standard bracket

Software：Built in PPMonitor Wireless exclusive management software for Managment PC

Requires Windows XP Professional Edition or Windows 7 Professional Edition

Sampling Rate：Up to 3 parameter data values every minute

 

 

Zigbee Alliance Mesh Networking System：

Low Power：2.4GHz ISM Band Reciever

Different Antennae Options：For the different network coverage required

Data Rate：250kbit/s over the air data rate

Channels：16 channels (802.15.4 Channel 11 to 26)

Power：+3dBm Output power (+5dB Boost mode)

Sensitivity：High sensitivity of -98dBm typical at 1% packet error rate

Memory：128k flash, 5kbytes of SRAM

产品购买联系