加拿大Solinst立管测压计601型

型号：601

设计用于放置在钻孔内，以提供过滤入口点。尖头 PVC 尖端也适用于推入钻孔底部的非常松散的沙子、溪流或非常松散的尾矿池沉积物中。

601 型立管测压计

非常适合金属采样，因为它由一个预成型的 Vyon 管组成，该管设置在一个穿孔的 PVC 压力计尖端内。601 型非常适用于水位监测、渗透性测量、施工控制、脱水排水作业和边坡稳定性调查。

601 型立管测压计

立管测压计尖端通过 3/4 英寸内径 PVC 立管使用滑动接头连接到表面。异径接头也可用于连接其他尺寸的立管或套管。可用的标准 601 立管测压计尖端长度为：6 英寸、1 英尺、2 英尺和 3 英尺（15 厘米、30 厘米、60 厘米和 90 厘米）。在此处了解如何使用立管渗压计。

多孔 HDPE (Vyon)

平均孔径 60 微米

阻挡淤泥和细沙

水位监测

渗透率测量

施工控制

脱水和排水操作

边坡稳定性调查

空气喷射：一个 1 英尺的渗压计有 18 x 3/8 英寸直径的孔，即 2 平方英寸/英尺。

金属取样

可靠的

低成本

60微米滤芯

刚性 PVC 外壳保护 Vyon 过滤器安装

中文内容来自机器翻译，内容仅供参考，实际内容可参考原厂介绍或以合同为准。

英文原文：

 

 

The Solinst Model 601 Standpipe Piezometer is designed to be placed within a drilled hole to provide a filtered inlet point. The pointed PVC tip is also suitable for pushing into very loose sands at the base of a borehole, a stream, or into very loose tailings pond sediments.

 

The 601 is excellent for metals sampling, as it is composed of a preformed Vyon tube set inside a perforated PVC piezometer tip. The Model 601 is well suited for water level monitoring, permeability measurements, construction control, de-watering drainage operations, and slope stability investigations.

 

The 601 Standpipe Piezometer tip connects to the surface with 3/4” ID PVC riser pipe using slip-fit couplings. Reducer couplings can also be used to connect to other sizes of riser pipe or casing. The standard 601 Standpipe Piezometer tip lengths available are: 6”, 1 ft, 2 ft and 3 ft (15 cm, 30 cm, 60 cm and 90 cm). Learn how to use a Standpipe Piezometer here.

 

Solinst also offers the Model 615 stainless steel Drive-Point Piezometer, which is designed to be pushed into the soil below the bottom of a borehole. They can also be driven directly into the ground from the surface. 

 

Filter Specifications：

Porous HDPE (Vyon)

Average pore size 60 microns

Keeps out silts and fine sands

 

Applications：

Water level monitoring

Permeability measurements

Construction control

De-watering and drainage operations

Slope stability investigations

Air Sparging: a 1 ft. Piezometer has 18 x 3/8” diameter holes i.e. 2 sq inches/ft.

Metals Sampling

 

Advantages：

Reliable

Low cost

60 micron filter element

Rigid PVC housing protects Vyon filter installation