加拿大Solinst初级水位记录仪Levelogger 5 Junior(3001)

产品名称：初级水位记录仪

品牌：Solinst

产地：加拿大

型号：Levelogger 5 Junior 3001

 

Levelogger 5 Junior 为测量地下水和地表水的水位和温度提供了一种廉价的替代方案。

Levelogger 5 Junior 在一个紧凑的 22 mm x 160 mm (7/8" x 6.3") 不锈钢外壳中结合了压力传感器、温度检测器、数据记录器和 5 年电池（基于 1 分钟的采样率） .

Levelogger 5 Junior 使用与 Levelogger 5 相同的耐用 Hastelloy® 压力传感器记录绝对压力。Hastelloy 传感器在恶劣环境中具有出色的性能，可以承受 2 倍的超压而不会造成永久性损坏。

Levelogger 5 Junior 的内存容量为 75,000 组温度和水位数据点。读数在用户定义的 0.5 秒到 99 小时之间的间隔内呈线性。精度为 0.1% FS，采用终生工厂校准。

 

低成本

精度为 0.1% FS

75,000 个数据点的内存

坚固的哈氏合金压力传感器

单眼光学可实现快速、可靠的通信

 

Levelogger 5 Junior 的编程与 Levelogger 5 相同。桌面阅读器 5、现场阅读器 5 或 PC 接口电缆将 Levelogger 连接到笔记本电脑或台式电脑。Levelogger 软件自动检测连接的数据记录器的类型。编程、下载、数据管理和导出是直观的任务。实时查看选项允许即时查看实时水位和温度读数，与预定的编程间隔无关。

Levelogger 5 Junior 输出温度和温度补偿水位读数。使用 Solinst Levelogger 软件中的数据向导，您可以通过一个 Barologger 5 文件同时对多个 Levelogger 5 Junior 文件进行气压补偿。

Levelogger 5 Junior 与 Levelogger 5 系列配件兼容，包括 Solinst Levelogger 5 应用程序接口、DataGrabber 5 数据传输设备、SDI-12 接口电缆和 Solinst 遥测系统。

这些紧凑型数据记录器易于部署。安装可使用直读电缆、不锈钢电缆或 Kevlar® 绳索悬挂，可选择使用 Solinst 2" 锁定井盖。

 

监测井水和地表水的水位

泵和段塞测试

水库和雨水径流管理

流域和流域监测

流量测量、湖泊和湿地监测

储罐液位测量

 

液位传感器：    带有哈氏合金传感器的压阻硅

范围：    5,10 米

准确性：    ± 0.1% 满量程

解决：    0.02% FS 至 0.01% FS

计量单位：    cm, m, ft, psi, kPa, bar, (ºC, ºF)

正常化：    自动温度补偿

温度补偿范围：    0ºC 至 40ºC

温度感应器：    铂电阻温度检测器 (RTD)

准确性：    ± 0.1ºC

解决：    0.1ºC

电池寿命：    5 年（基于 1 个读数/分钟）

工作温度：    - 20ºC 至 80ºC

时钟精度（典型）：    ± 1 分钟/年（- 20ºC 至 80ºC）

记忆模式：    连续或板岩

读数：    75,000组读数

沟通：    光纤高速：57,600 bps，带 USB

尺寸：    22 毫米 x 160 毫米（7/8" x 6.3"）

重量：    145 克（5.1 盎司）

润湿材料：    316 不锈钢、Delrin®、Viton®、哈氏合金

采样模式：    线性、实时视图、未来开始

测量率：    0.5 秒至 99 小时

气压补偿：    数据向导和 Barologger 5

 

LT 型号    满量程 (FS)                准确性                                     解决

M5          5 米（16.4 英尺）      ± 0.5 厘米，0.020 英尺。    0.02% FS

M10        10 米（32.8 英尺）    ± 1.0 厘米，0.032 英尺。    0.01% FS

中文内容来自机器翻译，内容仅供参考，实际内容可参考原厂介绍或以合同为准。

英文原文：

 

The Levelogger 5 Junior provides an inexpensive alternative for measuring groundwater and surface water levels and temperature. The Levelogger 5 Junior combines a pressure sensor, temperature detector, a datalogger, and 5-year battery (based on a 1-minute sampling rate) in one compact 22 mm x 160 mm (7/8" x 6.3") stainless steel housing.

 

Level Sensor:    Piezoresistive Silicon with Hastelloy Sensor

Ranges:    5,10 m

Accuracy:    ± 0.1% FS

Resolution:    0.02% FS to 0.01% FS

Units of Measure:    cm, m, ft, psi, kPa, bar, (ºC, ºF)

Normalization:    Automatic Temp Compensation

Temp Compensation Range:    0ºC to 40ºC

Temperature Sensor:    Platinum Resistance Temperature Detector (RTD)

Accuracy:    ± 0.1ºC

Resolution:    0.1ºC

Battery Life:    5 Years (based on 1 reading/minute)

Operating Temperature:    - 20ºC to 80ºC

Clock Accuracy (typical):    ± 1 minute/year (- 20ºC to 80ºC)

Memory Modes:    Continuous or Slate

Maximum Readings:    75,000 sets of readings

Communication:    Optical high-speed: 57,600 bps with USB

Size:    22 mm x 160 mm (7/8" x 6.3")

Weight:    145 grams (5.1 oz)

Wetted Materials:    316 Stainless Steel, Delrin®, Viton®, Hastelloy

Sampling Mode:    Linear, Real Time View, Future Start

Measurement Rates:    0.5 sec to 99 hours

Barometric Compensation:    Data Wizard and Barologger 5

 

LT Models    Full Scale (FS)    Accuracy    Resolution

M5    5 m (16.4 ft.)    ± 0.5 cm, 0.020 ft.    0.02% FS

M10    10 m (32.8 ft.)    ± 1.0 cm, 0.032 ft.    0.01% FS

 

Features：

Low cost

Accuracy of 0.1% FS

Memory for 75,000 data points

Robust Hastelloy pressure sensor

Single-eye optical for fast, reliable communication

 

Operation：

Programming the Levelogger 5 Junior is the same as with the Levelogger 5. A Desktop Reader 5, Field Reader 5 or PC Interface Cable connects the Levelogger to a laptop or desktop PC. Levelogger Software automatically detects the type of datalogger that is connected. Programming, downloading, data management and export are intuitive tasks. The Real Time View option allows immediate viewing of live water level and temperature readings, independent of the scheduled programming intervals.

 

The Levelogger 5 Junior outputs temperature and temperature compensated water level readings. Using the Data Wizard in the Solinst Levelogger Software, you can barometrically compensate multiple Levelogger 5 Junior files simultaneously, with just one Barologger 5 file.

 

The Levelogger 5 Junior is compatible with Levelogger 5 Series accessories, including the Solinst Levelogger 5 App Interface, DataGrabber 5 data transfer device, SDI-12 Interface Cable, and Solinst Telemetry Systems.

 

These compact dataloggers are straightforward to deploy. Installation can be with direct read cables, by stainless steel wireline or Kevlar® cord suspension, with the option of using Solinst 2" Locking Well Caps.

 

Applications：

Monitoring water levels in wells and surface water

Pump and slug tests

Reservoir and stormwater runoff management

Watershed and drainage basin monitoring

Stream gauging, lake and wetland monitoring

Tank level measurement

 

The Levelogger 5 Junior records absolute pressure using the same durable Hastelloy® pressure sensor as the Levelogger 5. The Hastelloy sensor has excellent performance in harsh environments and can withstand 2 times overpressure without permanent damage.

 

The Levelogger 5 Junior features a memory with a capacity of 75,000 sets of temperature and water level data points. Readings are linear at a user-defined interval between 0.5 second to 99 hours. Accuracy is 0.1% FS with lifetime factory calibration.