K16591型美国克勒快速液体闪点测试仪（美国KOEHLER）

产品介绍

K16591型美国克勒快速液体闪点测试仪封闭式闪点测定仪（KOEHLER）

 

英文名称：Rapid Flash Tester, Closed Cup

型号：K16591

品牌：美国克勒（KOEHLER）

产地：美国

更多型号：

K16500 Rapid Flash Tester, Closed Cup, Aluminum Test Cup/Brass Lid & Shutter, 115V 60Hz

K16591 Rapid Flash Tester, Closed Cup,  Aluminum Test Cup/Brass Lid & Shutter, 220-240V 50/60Hz

K16502 Rapid Flash Tester, Closed Cup, Stainless Steel Test Cup, Lid & Shutter, 115V 60Hz

K16592 Rapid Flash Tester, Closed Cup, Stainless Steel Test Cup, Lid & Shutter, 220-240V 50/60Hz     

 

购买联系：

北京恒仪科技有限公司     18633229965

美国克勒K16591快速液体闪点测定仪测试方法：

    验证闪点或在-30℃至+ 300℃的范围内的小样本的持续燃烧性能。

美国克勒K16591快速液体闪点测定仪特色：

    符合ASTM D3278，D3828; DOT CFR 49-173.115; 国际航空运输协会;

    ISO 9038，BS3900部分A11，A13，A14和相关规范

    用2mL的样品一个分钟的测试

    操作简单

 

美国克勒K16591快速液体闪点测定仪介绍：

     通过使用小样品燃烧品质提供闪点或持续快速测定 。闪光灯/不闪光测试结果  在一分钟以下212°F（100℃）用2mL的实现为闪点  样品。非常适合于质量保证和符合环保要求的  测试以及实际闪点油漆，香水，碳氢化合物和  其他液体。开杯模型被用于确定持续燃烧  的易燃和不可燃的液体的混合物的品质特性  评估可燃性当与广泛不同的闪点或液体  特性。功能方便半自动的闪光操作/否 闪存测试。设置数字显示器上的测试温度和注入2毫升或  4mL的样品到样品杯中。该测试仪快速稳定本身在  所希望的值，从而允许施加试验火焰，结果要  由操作者观察到。单元还执行的常规测定  由小规模封闭测试仪方法实际闪蒸温度。 该闭杯模型是用于常规闪点测试  范围为-30至+ 300℃（-22至+ 572°F）。

 

附赠配件：

    温度计，范围32至572°F（0〜300℃）

    注射器

 

规格：

    符合的规格：ASTM D3278，D3828; IP 303; ISO 3679，ISO 3680，ISO 9038; DOT CFR 49-173.115; IATA

电气：    

115V 60Hz      220-240V 50 / 60Hz

外形尺寸：38.1x8.6x16.2cm

净重：5.0千克

其他可选配件：

    K16506燃料钢瓶阀门

    K16507导热胶的温度计

    K16508金属冷却块，以促进测试之间的样品杯的冷却

    K16509制冷剂带电冷却块保持为低于环境测试冷却混合物

    K16510注射2毫升/ 4毫升

    K16511温度计，范围32至572°F / 0至300℃

    K16512温度计，范围32至230°F

    K16513温度计，范围212至572°F

    K16514温度计，范围为0〜110℃

    K16515温度计，范围为100〜300℃

    K16516温度计，范围-36至+ 105°F

    K16517温度计，范围-38至+ 40℃

 

英文介绍：

 

Test Method

Verifies the flash point or the sustained burning qualities of small samples in the range of –30°C to +300°C.

 

Features

    Conforms to ASTM D3278, D3828; DOT CFR 49-173.115; IATA;

    ISO 9038, BS3900 Part A11, A13, A14 and related specifications

    One minute test with a 2mL sample

    Simple to operate

 

Description

Rapid Tester® provides rapid determinations of flash point or sustained burning qualities by using a small sample. A flash/no flash test result is achieved in one minute for flash points below 212°F (100°C) with a 2mL sample. Ideally suited for quality assurance and environmental compliance testing as well as actual flash point for paints, fragrances, hydrocarbons and other liquids. Open cup models are used for determining sustained burning qualities characteristics of mixtures of flammable and nonflammable liquids or liquids with widely different flash points when assessing flammability characteristics. Features convenient semi-automatic operation for flash/no flash tests. Set the test temperature on the digital display and inject a 2mL or 4mL sample into the sample cup. The tester quickly stabilizes itself at the desired value, permitting the test flame to be applied and the result to be observed by the operator. Unit also performs conventional determinations of actual flash temperature by the small scale closed tester method. The Closed Cup Model is for routine flash point tests in the range from –30 to +300°C (–22 to +572°F).

 

 

Additional Accessories

 

K16506 Fuel Cylinder Valve

K16507 Heat Transfer Compound for thermometer

K16508 Metal Cooling Block to facilitate cooling of the sample cup between tests

K16509 Refrigerant Charged Cooling Block to hold cooling mixture for subambient testing

K16510 Syringe 2mL/4mL

K16511 Thermometer, range 32 to 572°F/0 to 300°C

K16512 Thermometer, range 32 to 230°F

K16513 Thermometer, range 212 to 572°F

K16514 Thermometer, range 0 to 110°C

K16515 Thermometer, range 100 to 300°C

K16516 Thermometer, range –36 to +105°F

K16517 Thermometer, range –38 to +40°C

产品购买联系