首页 > 共享仪器设备

英国PPM无线室内空气质量监测仪IAQ Profile

2022-05-17 17:39:02

产品名称:无线室内空气质量监测仪

品牌:PPM

产地:英国

型号:IAQ Profile

英国PPM无线室内空气质量监测仪IAQ Profile

无线室内空气质量监测仪IAQ Profile介绍:

 

无线 IAQ(室内空气质量)剖面监测器可满足所有 IAQ 监测应用和要求。

 

IAQ Profile 系统旨在提供建筑物室内空气质量的可视化表示,作为与病态建筑综合症等条件相关的建筑物管理标准的一部分。由于大量单元可以联网,系统可以显示不同位置选定的 IAQ 参数浓度随时间的精确变化。IAQ Profile Monitor 系统使用户能够控制和运行多个无线 IAQ 采样单元——所有这些单元都通过复杂可靠的 ZigBee 无线网状系统进行通信。网状网络系统具有成本效益、易于安装和使用简单:组成网状网络的节点自动配置**信号路径。

 

甲醛

温度

湿度

二氧化氮 (NO2)

一氧化碳 (CO)

二氧化碳 (CO2)

二氧化硫 (SO2)

总挥发性有机化合物 (TVOC)

甲烷 (CH4)

氨 (NH3)

臭氧 (O3)

水(H20)单区传感电缆

烟雾传感器

* 提供其他传感器选项

 

IAQ Profile Monitor 结合了多种先进的气体传感器技术来监测目标气体,包括 NDIR、PID 和电化学。

英国PPM无线室内空气质量监测仪IAQ Profile

无线室内空气质量监测仪IAQ Profile参数:

 

电源供电:12v DC 通过带有 2.5mm 直径插头的外部 DC 适配器

工作范围:0-30oC, 15-90%RH

尺寸:240mm x 240mm x 55mm(多可容纳 7 个传感器)

易于安装:主节点通过 USB 端口轻松连接到 Manager PC。PPMonitor 无线装置可通过 VESA 标准支架轻松安装在墙上

软件:内置 PPMonitor Wireless 专用管理软件,用于管理 PC

           需要 Windows XP 专业版或 Windows 7 专业版

采样率:每分钟多 7 个参数数据值

低电量:2.4GHz ISM 频段接收器

不同的天线选项:针对所需的不同网络覆盖

数据速率:250kbit/s 空中数据速率

频道:16 个通道(802.15.4 通道 11 至 26)

力量:+3dBm 输出功率(+5dB 升压模式)

灵敏度:-98dBm 的高灵敏度(典型值为 1% 数据包错误率)

记忆:128k 闪存,5kbytes SRAM

 

PPMonitor 软件

英国PPM无线室内空气质量监测仪IAQ Profile

中文内容来自机器翻译,内容仅供参考,实际内容可参考原厂介绍或以合同为准。

英文原文:

 

The Wireless IAQ (Indoor Air Quality) Profile Monitor is the latest monitoring unit to be launched by PPM Technology Ltd to assist with all your IAQ monitoring applications and requirements.

 

The IAQ Profile system has been designed to give a visual representation of indoor air quality in buildings, as part of the buildings management standards in relation to conditions such as Sick Building Syndrome. Since a great number of units can be networked, the system can show prescise changes in concentration of selected IAQ parameters in various locations over time. The IAQ Profile Monitor system enables the user to control and run several wireless IAQ sampling units — all communicating together via the sophisticated and reliable ZigBee wireless mesh system. The mesh network system is costeffective, easy to install and simple to use: the nodes which make up the mesh automatically configure the optimal signal route.

 

 

Formaldehyde

Temperature

Humidity

Nitrogen Dioxide (NO2)

Carbon Monoxide (CO)

Carbon Dioxide (CO2)

Sulphur Dioxide (SO2)

Total Volatile Organic Compounds (TVOC's)

Methane (CH4)

Ammonia (NH3)

Ozone (O3)

Water (H20) single zone sensing cable

Smoke Sensor

Oxygen

* Other sensor options available

 

The IAQ Profile Monitor incorporates a variety of advanced gas sensor technologies to monitor the target gases including NDIR, PID and Electrochemical.

 

 

Instrument Specifications:

Mains Powered:12v DC via external DC adaptor with 2.5mm diameter jack plug

Operating Range:0-30oC, 15-90%RH

Dimensions:240mm x 240mm x 55mm (Houses up to 7 sensors)

Easy to Install:Master Node connects easily to the Manager PC via the USB port. PPMonitor Wireless Unit easily wall mounted via VESA standard bracket

Software:Built in PPMonitor Wireless exclusive management software for Managment PC

Requires Windows XP Professional Edition or Windows 7 Professional Edition

Sampling Rate:Up to 7 parameter data values every minute

 

 

Zigbee Alliance Mesh Networking System:

Low Power:2.4GHz ISM Band Reciever

Different Antennae Options:For the different network coverage required

Data Rate:250kbit/s over the air data rate

Channels:16 channels (802.15.4 Channel 11 to 26)

Power:+3dBm Output power (+5dB Boost mode)

Sensitivity:High sensitivity of -98dBm typical at 1% packet error rate

Memory:128k flash, 5kbytes of SRAM 

相关内容

推荐产品

最新资讯

最新产品

首页
电话联系